Section 1 Seats and Restraint Systems
Here you’ll find information about the seats in your vehicle and how to use your safety belts properly. You can also
learn about some things you should not do with air bags and safety belts.
1-2 Seats and Seat Controls
1-8 Rear Seats
1-21 Safety Belts: They’re for Everyone
1-25 Here Are Questions Many People Ask About
Safety Belts -- and the Answers
1-26 How to Wear Safety Belts Properly
1-26 Driver Position
1-35 Safety Belt Use During Pregnancy
1-36 Right Front Passenger Position
1-37 Air Bag Systems
1-45 Center Passenger Position
1-48 Rear Seat Passengers
1-52 Rear Safety Belt Comfort Guides for
Children and Small Adults
1-56 Children
1-59 Restraint Systems for Children
1-77 Older Children
1-79 Safety Belt Extender
1-80 Checking Your Restraint Systems
1-80 Replacing Restraint System Parts After
a Crash
1-2
Seats and Seat Controls
This section tells you about the seats -- how to
adjust them, take them out, put them back in, fold
and unfold them.
Driver’s Four-Way Manual Seat
To move the seat forward
or rearward, pull up on the
lever, located on the front
left of the seat, to unlock it.
Slide the seat to where you want it and release the lever.
To make sure that the seat is locked into place, try to
move the seat with your body.
To raise the seat, pull up
on the lever located on the
front right side of the seat.
To lower the seat, push the
lever down. Adjust the seat
and release the lever.
CAUTION:
You can lose control of the vehicle if you try to
adjust a manual driver’s seat while the vehicle is
moving. The sudden movement could startle and
confuse you, or make you push a pedal when you
don’t want to. Adjust the driver’s seat only when
the vehicle is not moving.
1-3
Manual Front Passenger Seats
To move the seat forward
or rearward, pull up on the
lever, located on the front of
the seat, to unlock it.
Slide the seat to where you want it and release the lever.
To make sure that the seat is locked into place, try to
move the seat with your body.
Six-Way Power Seat (Option)
The six-way power seat
controls are located on the
outboard side of the driver’s
seat or on the outboard sides
of both the driver’s and
front passenger’s seats.
Move the front of the control in the direction of the
arrows to adjust the front portion of the cushion up
or down.
Move the rear of the control in the direction of the
arrows to adjust the rear portion of the cushion up
or down.
Lift up or push down on both outer arrows at the
same time to move the entire seat up or down.
To move the whole seat forward or rearward, slide
the control in the direction of the center arrows.
1-4
Manual Lumbar
The knob that controls
this feature is located
on the outboard sides
of the driver’s and front
passenger’s seats.
Turn the knob toward the front of the vehicle to increase
lumbar support. Turn the knob toward the rear of the
vehicle to decrease lumbar support.
Memory Seat (Option)
If your vehicle has this
feature, the controls are
located on the driver’s
door panel and are used
to program and recall
the driver’s seat position
and outside rearview
mirror position.
Adjust the driver’s seat and the outside rearview mirrors
to the position you would like for driving. Then press
and hold memory button 1 for more than three seconds.
A double beep will sound when the memory seat and
mirrors are set.
To set the seat and outside rearview mirrors for a
second driver, follow the previous steps, but press
button 2 instead.
To recall your memory positions, your vehicle must
be in PARK (P). Push and release the memory button
(1 or 2) corresponding to the desired driving position.
The seat and the outside rearview mirrors will move to
the position previously stored for the identified driver.
You will hear one beep.
source: http://www.extendedgmwarranty.com/ow...Rendezvous.pdf
Here you’ll find information about the seats in your vehicle and how to use your safety belts properly. You can also
learn about some things you should not do with air bags and safety belts.
1-2 Seats and Seat Controls
1-8 Rear Seats
1-21 Safety Belts: They’re for Everyone
1-25 Here Are Questions Many People Ask About
Safety Belts -- and the Answers
1-26 How to Wear Safety Belts Properly
1-26 Driver Position
1-35 Safety Belt Use During Pregnancy
1-36 Right Front Passenger Position
1-37 Air Bag Systems
1-45 Center Passenger Position
1-48 Rear Seat Passengers
1-52 Rear Safety Belt Comfort Guides for
Children and Small Adults
1-56 Children
1-59 Restraint Systems for Children
1-77 Older Children
1-79 Safety Belt Extender
1-80 Checking Your Restraint Systems
1-80 Replacing Restraint System Parts After
a Crash
1-2
Seats and Seat Controls
This section tells you about the seats -- how to
adjust them, take them out, put them back in, fold
and unfold them.
Driver’s Four-Way Manual Seat
To move the seat forward
or rearward, pull up on the
lever, located on the front
left of the seat, to unlock it.
Slide the seat to where you want it and release the lever.
To make sure that the seat is locked into place, try to
move the seat with your body.
To raise the seat, pull up
on the lever located on the
front right side of the seat.
To lower the seat, push the
lever down. Adjust the seat
and release the lever.
CAUTION:
You can lose control of the vehicle if you try to
adjust a manual driver’s seat while the vehicle is
moving. The sudden movement could startle and
confuse you, or make you push a pedal when you
don’t want to. Adjust the driver’s seat only when
the vehicle is not moving.
1-3
Manual Front Passenger Seats
To move the seat forward
or rearward, pull up on the
lever, located on the front of
the seat, to unlock it.
Slide the seat to where you want it and release the lever.
To make sure that the seat is locked into place, try to
move the seat with your body.
Six-Way Power Seat (Option)
The six-way power seat
controls are located on the
outboard side of the driver’s
seat or on the outboard sides
of both the driver’s and
front passenger’s seats.
Move the front of the control in the direction of the
arrows to adjust the front portion of the cushion up
or down.
Move the rear of the control in the direction of the
arrows to adjust the rear portion of the cushion up
or down.
Lift up or push down on both outer arrows at the
same time to move the entire seat up or down.
To move the whole seat forward or rearward, slide
the control in the direction of the center arrows.
1-4
Manual Lumbar
The knob that controls
this feature is located
on the outboard sides
of the driver’s and front
passenger’s seats.
Turn the knob toward the front of the vehicle to increase
lumbar support. Turn the knob toward the rear of the
vehicle to decrease lumbar support.
Memory Seat (Option)
If your vehicle has this
feature, the controls are
located on the driver’s
door panel and are used
to program and recall
the driver’s seat position
and outside rearview
mirror position.
Adjust the driver’s seat and the outside rearview mirrors
to the position you would like for driving. Then press
and hold memory button 1 for more than three seconds.
A double beep will sound when the memory seat and
mirrors are set.
To set the seat and outside rearview mirrors for a
second driver, follow the previous steps, but press
button 2 instead.
To recall your memory positions, your vehicle must
be in PARK (P). Push and release the memory button
(1 or 2) corresponding to the desired driving position.
The seat and the outside rearview mirrors will move to
the position previously stored for the identified driver.
You will hear one beep.
source: http://www.extendedgmwarranty.com/ow...Rendezvous.pdf
0 komentar:
Posting Komentar